![](https://unpickingfashion.wordpress.com/wp-content/uploads/2020/09/84bcb581-e6f8-44a9-9688-8213fe854c70.jpeg)
![](https://unpickingfashion.wordpress.com/wp-content/uploads/2020/09/4139ef7c-e555-4621-a19b-2150b3c5edbe.jpeg)
![](https://unpickingfashion.wordpress.com/wp-content/uploads/2020/09/43caf189-34cb-48f8-a7cc-91cfc0e05d54.jpeg)
![](https://unpickingfashion.wordpress.com/wp-content/uploads/2020/09/9706c798-06fa-4e87-811b-4e1565eb44ca.jpeg)
![](https://unpickingfashion.wordpress.com/wp-content/uploads/2020/09/e18d911f-4d21-49c5-95f1-1e1b5d428945.jpeg)
![](https://unpickingfashion.wordpress.com/wp-content/uploads/2020/09/e52b5245-d1a2-41a0-8d04-caa122e3d29e.jpeg)
![](https://unpickingfashion.wordpress.com/wp-content/uploads/2020/09/a7492b15-a454-4fbb-ba61-7e65fd1303cb.jpeg)
![](https://unpickingfashion.wordpress.com/wp-content/uploads/2020/09/c3984cec-c4fa-46c7-bb4f-bf5ab0757311.jpeg)
![](https://unpickingfashion.wordpress.com/wp-content/uploads/2020/09/43294d9e-dc13-4633-bff1-b6d9fe6a95c7.jpeg)
I have never sewn a curved seam before so I am very happy with the finished seam. It is a bit tricky to sew when you have so many pins holding the curve in place. The only issue I had when sewing the seam was with the bobbin, the tension on the bobbin case was too loose. So when I was sewing the bobbin would rattle in the machine and the stitches on the back of my fabric were very loopy (as shown in the photo below), so I tightened the bobbin by turning the screw on the side of the bobbin case and then I re-sewed the seam.
Love this post! Well done Sophie, Clear, concise and great use of imagery 🙂
LikeLike